# $Id: pnpdump.c,v 1.8 1997/01/14 21:05:35 fox Exp $
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
# 
# For details of this file format, see isapnp.conf(5)
#
# Compiler flags: -DREALTIME -DNEEDSETSCHEDULER
#
# Trying port address 0203
# Board 1 has serial identifier 81 ff ff ff ff 20 00 a8 65

# (DEBUG)
(READPORT 0x0203)
(ISOLATE)
(IDENTIFY *)

# Card 1: (serial identifier 81 ff ff ff ff 20 00 a8 65)
# YMH0020 Serial No -1 [checksum 81]
# Version 1.0, Vendor version 0.0
# ANSI string -->OPL3-SA3 Sound Board<--
#
# Logical device id YMH0021
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE YMH0020/-1 (LD 0
# Multiple choice time, choose one only !

#     Start dependent functions: priority preferred
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0220
#             Maximum IO base address 0x0220
#             IO base alignment 16 bytes
#             Number of IO addresses required: 16
 (IO 0 (BASE 0x0220))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0530
#             Maximum IO base address 0x0530
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 1 (BASE 0x0530))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0388
#             Maximum IO base address 0x0388
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 2 (BASE 0x0388))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0330
#             Maximum IO base address 0x0330
#             IO base alignment 2 bytes
#             Number of IO addresses required: 2
# (IO 3 (BASE 0x0330))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0370
#             Maximum IO base address 0x0370
#             IO base alignment 2 bytes
#             Number of IO addresses required: 2
# (IO 4 (BASE 0x0370))
#       IRQ 5.
#             High true, edge sensitive interrupt
 (INT 0 (IRQ 5 (MODE +E)))
#       First DMA channel 0.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type F
# (DMA 0 (CHANNEL 0))
#       Next DMA channel 1.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type F
 (DMA 1 (CHANNEL 1))

#       Start dependent functions: priority acceptable
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0240
#             Maximum IO base address 0x0240
#             IO base alignment 16 bytes
#             Number of IO addresses required: 16
# (IO 0 (BASE 0x0240))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0e80
#             Maximum IO base address 0x0e80
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 1 (BASE 0x0e80))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0388
#             Maximum IO base address 0x0388
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
 (IO 2 (BASE 0x0388))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0300
#             Maximum IO base address 0x0300
#             IO base alignment 2 bytes
#             Number of IO addresses required: 2
# (IO 3 (BASE 0x0300))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0100
#             Maximum IO base address 0x0ffe
#             IO base alignment 2 bytes
#             Number of IO addresses required: 2
# (IO 4 (BASE 0x0100))
#       IRQ 5, 7, 9, 10 or 11.
#             High true, edge sensitive interrupt
# (INT 0 (IRQ 11 (MODE +E)))
#       First DMA channel 0, 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type F
 (DMA 0 (CHANNEL 0))
#       Next DMA channel 0, 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type F
# (DMA 1 (CHANNEL 1))

#       Start dependent functions: priority functional
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0220
#             Maximum IO base address 0x0280
#             IO base alignment 16 bytes
#             Number of IO addresses required: 16
# (IO 0 (BASE 0x0220))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0530
#             Maximum IO base address 0x0f48
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 1 (BASE 0x0530))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0388
#             Maximum IO base address 0x03f8
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 2 (BASE 0x0388))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0300
#             Maximum IO base address 0x0334
#             IO base alignment 2 bytes
#             Number of IO addresses required: 2
 (IO 3 (BASE 0x0300))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0100
#             Maximum IO base address 0x0ffe
#             IO base alignment 2 bytes
#             Number of IO addresses required: 2
# (IO 4 (BASE 0x0100))
#       IRQ 5, 7, 9, 10 or 11.
#             High true, edge sensitive interrupt
 (INT 0 (IRQ 9 (MODE +E)))
#       First DMA channel 0, 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type F
# (DMA 0 (CHANNEL 0))
#       Next DMA channel 0, 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type F
# (DMA 1 (CHANNEL 0))

#     End dependent functions
 (ACT Y)
))
#
# Logical device id YMH0022
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE YMH0020/-1 (LD 1
#     Compatible device id PNPb02f

# Multiple choice time, choose one only !

#     Start dependent functions: priority preferred
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0201
#             Maximum IO base address 0x0201
#             IO base alignment 1 bytes
#             Number of IO addresses required: 1
# (IO 0 (BASE 0x0201))

#       Start dependent functions: priority functional
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0201
#             Maximum IO base address 0x0211
#             IO base alignment 16 bytes
#             Number of IO addresses required: 1
# (IO 0 (BASE 0x0201))

#     End dependent functions
# (ACT Y)
))
# End tag... Checksum 0x00 (OK)
(WAITFORKEY)